Functional ankle brace with air gel padding
protect.Ankle air gel is an ankle joint brace. The product is exclusively to be used for the orthotic fitting of the ankle joint and only on unbroken skin.
Anatomically shaped shells
Two straps for quick and secure fastening
Thanks to the adaptability of the padding the ankle brace can be used for the left and the right ankle
Hell strap (individually adjustable)
Universal "one size fits all"
How does it work?/Mode of action
Rigid shells provide very good stabilisation in pronation and supination movements
The padding adapts to the varying anatomical conditions and provides an uniform compression
Open all the hook and loop bands and hook and loop fasteners.
Adjust the width of the heel. Position the part that goes under the heel using the hook and loop fasteners so that the side parts fit well to the ankle.
Put the ankle at a 90 degree angle. Put the orthosis on in such a way that the heel is in the middle of the piece that goes under it and the side parts are adjusted to the ankle.
Close the bottom hook and loop fastener first and make sure that the side parts remain parallel.
Close the top hook and loop band.
Pull one strap tight or pull on both straps alternately until the orthosis is firmly in place and does not exert too much pressure on the ankle.
Polypropylene, Polyurethane, Velour
Wash by hand in a mild, cold soap solution. Rinse thoroughly. Do not wring. Leave to dry naturally. Do not iron. Soap residues can cause skin irritation and material wear. The product can be worn in both fresh and salt water. After wearing in water, rinse the product thoroughly with clean fresh water. Leave to dry naturally. Do not remove stains using benzene or chemical detergents.
- Conservative and post-operative care of fibular ligament ankle injuries (grade II to III)
- After distorsions
- Chronic instabilities of the ankle
Mon. to Thu. 08.00-17.00
- +49 921 912-0
- +49 921 912-783